CUSTOM-MADE READ EARPLUGS 2-IN-1

Pluggerz All-Fit Read banner
You don’t want to bothered by disturbing noises whilst studying, working or reading? Pluggerz Custom-Made Read 2-in-1 offers you the solution. Our earplugs suppress noises as much as possible, so you can focus maximally. Pluggerz Custom-Made Read 2-in-1 have a flat filter, that suppress noise strongly and it does not distort sound. It therefore guarantees optimum music quality, also great to wear at concerts and festivals! And the Read 2-in-1 can easily be connected to in-ear-speakers for optimum MP3 player output! And when yu want to listen to your music, you simply connect these earplugs to in-ear-speakers for optimum MP3 player output! Pluggerz Custom-Made Read 2-in-1 combines optimum comfort, the best protection and sound quality!

  • Incredibly comfortable
  • Suitable for long-term daily use
  • Your choice of changeable Flat filter without sound distortion (15, 20 or 25db)
  • Small filter, also suitable for small ear canals
  • Can also be connected to in-ear-speakers for optimum MP3 player output
  • Silicon material (soft)
  • Includes handy storage pouch
  • Available in 5 different colours, including transparent
  • CE certified and tested according to EN 352-2

Pluggerz Custom 2-in-1 with headset
Service

The hearing protectors are made from (soft) silicone material and provided with a special coating. This combination prevents allergic reactions and allows the hearing protector to be easily cleaned. Clean your Pluggerz hearing protector with care, using the available Pluggerz Smart Clean Set so that hygienic use remains guaranteed. Remove any earwax in the duct using the small earwax hook that is supplied.
Attention: cleaning using aggressive cleaning agents must be avoided!

Allow them to dry thoroughly before placing them back in the storage case. Have your Pluggerz hearing protector inspected by your supplier each year. If the hearing protector no longer seals your ear canal adequately the attenuation decreases and you will be less protected. The cause of an inadequate seal is usually a change in the ear canal, for example due to age or weight gain or loss. By carefully following these instructions the attenuation values will be guaranteed and you will remain protected in the most optimum way against hearing damage.

Service network

Pluggerz can determine the fit and the attenuation of existing hearing protection and is certified to service hearing protectors. Besides this Pluggerz can perform the annual inspection of hearing protectors. This is often required by the OS&H department. Please note that we can only service and inspect our own products.

Warning!

  • The Pluggerz hearing protectors are completely personal and can only work properly if they are fitted into the ear correctly.
  • If the hearing protector is fitted incorrectly or if the associated instructions are not followed then Pluggerz shall not be liable for the potential reduction in quality of the hearing protector.
  • The operation of the hearing protector can be negatively influenced if it comes into contact with chemicals. Please consult Pluggerz for further information about this.
  • The hearing protectors are only effective if they are worn with due care and permanently in a noisy environment.
  • The Pluggerz hearing protectors offer no protection without filter.

Fitting

  • You can distinguish your left and right hearing protector by the colour applied to your hearing protectors: red (right) and blue (left).
  • Hold the hearing protector between your thumb and forefinger.
  • Make sure that the indentation is at the front and that the point is pointing upwards.
  • Gently insert the hearing protector into your ear canal by turning it a quarter turn anti-clockwise.

Removing

  • Place your thumbnail in the indentation.
  • Lift up the hearing protector and remove it from your ear.

Click here for attenuation details.


The European Union type-examination is undertaken by: PZT 1974, Wilhelmshaven, Germany, TNO/TM 0336, Soesterberg, the Netherlands and IFA 0121, St. Augustin, Germany. The attenuation values for the hearing protectors are established in accordance with EN 352-2:2002 and measured in accordance with EN 13819-2:2-2. In addition, the APV, SNR, H, M and L values are determined in accordance with ISO 24869-1. The products are CE certified, with the exception of the ER-9 since this does not meet the minimum attenuation requirements set in EN-352.

Pluggerz Custom 2-in-1

PLUGGERZ MUSIC 2-IN-1 WILL FIT:

Sennheiser CX-300 II
Sennheiser CX310 Adidas Originals
Sennheiser CX-400 II
Sennheiser CX-500
Sennheiser CX-250
Sennheiser CX-270
Sennheiser CX-280
Sennheiser CX-281
Sennheiser PC-300
Sennheiser MM-30i
Sennheiser MM-50
Sennheiser MM-70i
Sennheiser IE-4
JBL reference 220
SkullCandy full metal jacket
SkullCandy 50/50
SkullCandy FMJ
Sony DR EX38IPB
SteelSeries Siberia
Philips SHE8500
Creative EP-830
Monster Turbine PRO in ear
Konig HPPRO-260
Teufel Aureol Melody
Koss KDX200

Pluggerz Custom 2-in-1 headset measurements

$275.00 Select options